There is no need to think that making a sofa for the kitchen is a complex technological process. If you take into account all the rules, follow the recommendations, you can make a solid, solid structure. And the stage of finishing the piece of furniture will be the final fireworks.
A sofa is a necessary thing in everyday life. There are many variations of this piece of furniture. Due to the fact that it allows long-term, repeated use, the wear threshold increases sharply.
The main positive side of installing a sofa with your own hands – this is an opportunity not to overpay in a store for an item that costs much less than a “designer” one.
Factories produce uniform models. If you make furniture with your own hands, it can be made in the type and design that you have imagined in your imagination. This is another advantage of creating the design yourself.The variety of building supply stores and supermarkets ensures the availability of any material.
Content
- We decide on the design and construction
- Necessary materials
- Necessary tools
- Preparing the frame, backrest from timber and plywood
- Assembling a sofa for the kitchen
- Kitchen sofa upholstery
- The last stage is decoration
- VIDEO: How to make a corner sofa for the kitchen with your own hands.
- Sofas in the kitchen interior – 50 photo ideas:
We decide on the design and construction
The most popular, practical option is a kitchen corner sofa. This design can be used by disassembling it into separate sectors or placed as a whole, along the perimeter of the wall.
Thus, by covering the wooden panels of the sofa with varnish, you can protect it from the influence of humidity, dampness, and excessive dryness of the air. A corner installation consisting of two benches with a rounded middle will take up little space in the kitchen, which is very convenient.
There are two types of corner sofas: stationary and sliding. The first is easier to install, so it will perfectly "get the hang of" for a novice craftsman. The sliding design is troublesome to make, but outwardly quite presentable. Following the diagrams and recommendations, it is possible to make both types the first time with your own hands.
When designing your dream kitchen sofa, you need to decide on the upholstery. This detail will create an original, interesting piece of furniture. The choice of lining material can be microfiber or artificial leather.To make the sofa seats as soft as possible, it is important to choose the filler wisely. There are materials of normal, increased rigidity, soft, hard, elastic. All types will provide additional comfort and softness.
Necessary materials
The choice of manufacturing materials is a responsible step, since the durability of the structure and reliability depend on their quality. When buying lumber, you need to take a slightly larger amount. This determines the presence of defective elements.
For the kitchen structure you will need:
- Bars 15*15 mm – 1.2 m;
- Bars with a cross-section of 40*40 mm – 0.135 m;
- Bars 25*25 mm – 3.6 m;
- Bars 30*30 mm – 1.2 m;
- Board with a cross-section of 20*350 – 1 m;
- Rail 20*60 mm – 2.1 m;
- Plywood 1.2*45*255 cm;
- Foam rubber;
- Fastener plugs;
- Piano hinges;
- Angles;
- Euro bolts;
- Wood glue.
- Chipboard.
Before starting the main work, it is important to decide on the dimensions of the sofa. Craftsmen do not recommend making it according to standard parameters, since the slightest deviation from the norm can spoil the design.
Kitchen sofa size plan:
- Main sofa: length 1.2 m, height 0.85 m, back height 0.3 m;
- Side sofa – 0.45*0.45 m;
- Width of side panels – 0.45 m.;
- Seat height – 0.4 m.
Necessary tools
Given that the kitchen corner will be manufactured with your own hands, you need to take a set of tools from the carpenter's shop:
- Wood saw;
- Drill;
- Electric jigsaw;
- Screwdriver;
- Electronic planer;
- Building level;
- Ribbon;
- Sandpaper;
- Scissors;
- Stapler with staples.
- Knife for foam rubber.
Preparing the frame, backrest from timber and plywood
DIY Kitchen Sofa start with the installation of the frame. The process consists of the following stages.
- From plywood boards we make “patterns” of the sides with wavy edges for beauty.
We cut out individual parts according to the dimensions. - Using a plane, we refine the edges of the parts for perfect evenness. Some specialists use decorative adhesive tape for cuts.
- We make the base of the frame from two frames connected to short beams with Euro bolts.
We will connect them using these timber jumpers. - The frames are covered in front and back with plywood cut to size.
- The side sofa must be made using the same principle.
The two straight parts are ready. Let's start connecting the corner part. - Between the two modules, you need to make a "support" bent inward at 90 degrees. The material will be plywood, it is flexible and obedient.
- After bending, the plywood part is attached to the 40*40 mm frame beams and sheathed on all sides.
- Upon completion of the work, three modules of the sofa should emerge: a central section, a side bench, and a semicircular center.
The appearance of the corner sofa, made with your own hands, is gradually taking shape.
As a result of simple carpentry actions, you will get a three-section furniture unit.
Assembling a sofa for the kitchen
The construction of the structure's body is 50% of the idea's implementation. To form the sofa, seats need to be made.It is necessary to make "skeletons" from a 25*25 mm bar. They are sewn up with 25 mm thick plywood sheets. Unevenness and joints are rubbed with sandpaper. A mandatory condition is the treatment of wooden elements with an antiseptic solution, a layer of stain, and varnish.
Along each one, piano hinges should be reinforced. Afterwards, they will connect the main module to the seat.Before upholstery, all open areas of the modules are covered with plywood, the seats are attached to the frame. The wood is covered with varnish color.
Kitchen sofa upholstery
DIY Kitchen Sofa almost ready. The next stage is upholstery. Synthetic padding or foam rubber is chosen as the material. Each element of the sofa is measured.
Next, the lining should be covered with fabric. The most commonly used fabrics in this regard are: jacquard, velour, microfiber, flock. To perform the processing, cut out the details of the selected material according to the dimensions of the sofa elements with allowances.
The last stage is decoration
To make a corner sofa unique and distinctive, it undergoes additional transformation.
- The most effective way is to use covers with ties or colorful pillows.
Since the corner sofa is located in the kitchen, you can choose pillows made of water-repellent fabric, such as polyvinyl chloride. - An interesting solution would be to decorate individual elements of the sofa in the color of the curtains with prints.
On the sofa you can place pillows made of a material similar to the design of the kitchen drapery. - In winter, to add coziness to the kitchen, you can casually throw a soft, terry blanket and pillows on the sofa.
Bright pillows add mood to the room's decor.
Decorating the sofa is the most interesting part, so you can do it while taking a break from the main work.
VIDEO: How to make a corner sofa for the kitchen with your own hands.
Sofas in the kitchen interior – 50 photo ideas:
