Furniture stapler. What is it and how does it work?

There is a wide variety of different models toolov needed to make life easier. Stapler one of them. It has been popular for many years.

There are many modern types. Each of them is designed for a certain type of work, from simple to industrial use. Furniture is often used in everyday life. stapler.

The mechanism of the device consists of several important parts. Electric models are the most popular. It is connected to the power grid and can be used.

When the shot is fired, staplesand flies out and enters the wooden plane. Passing through the material, it is fixed in the furniture part.

Stapleyou are practically invisible. Only their backs are visible, which look like thin strips of metal. The fabric does not tear, it is firmly fixed in the right place.

Stapler is convenient toolom, which is necessary not only for builders. It is great for use in everyday life. It can be used not only staplesy, but also nails.

Types of staplers

There are several different types staplerov. Before buying this product, you need to carefully understand all the varieties.

Among the types available on the market, the following stand out.

1. Manual. It is a mechanical tool, the work on which is carried out with the application of physical force. The key advantage is mobility. It does not need to be connected to the power grid. You can work without worrying about whether there is an outlet nearby. But you will have to use physical force to perform toolom any actions. If you plan to do a large amount of work, you will quickly get tired. This will affect the time it takes to complete all the actions. The planned work will take several times longer than planned. Manual is great for re-upholstering furniture at home, when a small amount of work is planned.
   

   

2. Electric. To perform any actions with it, you will need electricity nearby. It can also work from a battery. Among the main disadvantages, it can be noted that its mechanism wears out quickly. In addition, the design has a weak impact force and a low rate of fire.
   

   

3. Pneumatic. It is considered the most powerful. It is often used in serious construction work. The principle of the pneumatic unit is the pressure of compressed air. Its power does not affect the speed with which it hammers staplesy. This parameter cannot be called the best among all types. For this staplerand it requires not only a compressor, but also electricity. It is perfect for performing restoration work at home. You should use a standard staplesat which there are no roundings. You should start with simpler models. The pneumatic unit is also distinguished by its high cost, especially if you also buy a compressor in the kit.
   

   

Before starting work, it is recommended to thoroughly understand the operation. The mechanical one must be adjusted before use. A rough canvas is best, on which you can perform test shots to adjust the equipment.

It is necessary to mark the placement in advance staples. This will help to achieve the same distance between them. When the shot is made, be sure to hold the material. Regularly check how much is left in staplere charge.

Advantages and disadvantages

Any equipment has its own advantages and disadvantages.

The advantages of mechanical staplerand refers to:

• Price;
•    it has a simple design (this parameter is important, since the simpler the design tool, the less often it will break);
• Mobility;
• Possibility of safe use.

The disadvantages of this type of equipment include the following factors.

• Working with it requires a lot of physical effort.
• It is characterized by low speed.

The advantages of electric include the following benefits.

• When working with it, you don’t need to apply physical effort;
• It has a high operating speed;
• Tool has high power.

Among the disadvantages of this type of equipment are:

• The cost is higher than that of mechanical;
• It requires an electrical connection (because of this, it can only be used within a limited radius, depending on the length of the wire);
• Heavier than the previous type.

Positive features of pneumatic staplerand should include:

• The speed of work is at a high level;
• It has great power.

The following are some of the disadvantages of this type of equipment.

• A compressor is required. This affects the cost, weight and dimensions.
• In most cases it is used as a stationary installation.

How to choose a quality mechanical stapler?

The mechanical unit is not very complex in design. But it has certain features that directly affect the ease of use.

1. Transparent Store: This is a convenient option that allows you to control how much is left in the device. staples.
2. Impact force regulator. This allows you to adjust the equipment depending on how dense the material is. Makes the work much easier.
3. The narrow working tip of the device helps ensure the accuracy of the shot.
4. For safety, there is a handle stopper. This will help prevent accidental firing.
5. The handle has a rubber base. This will help toolnot slip in your hands. This will make it more convenient to work with the equipment.

How to choose a quality pneumatic stapler?

First, it is necessary to determine the range of planned actions. From the conditions in which it will be applied tool, the amount of consumables and the condition of the work surface determine the parameters that you need to rely on when choosing. Universal models are suitable for furniture production, where the balance between efficiency in performing work and ergonomic qualities is maintained.

If you plan to use the unit at home, it is better to choose an entry-level pneumatic model. Such equipment allows targeted work with small hardware. If you plan to work with textiles, such tooland it will be quite enough.

How to choose staples for a furniture stapler

To make the right choice, please refer to the instructions that come with it. tooly. It is worth considering certain parameters to choose the right option. The following parameters are important.

1. Depth. The most common value is from 4 to 14 mm. The specific depth depends on the nature of the work that is planned to be performed. For covering a chair with tapestry, a value of 8 mm is suitable.
   

   

2. Type staplesy. It must necessarily match the model of the unit. To do this, you need to compare the markings on the packages. They must match. If staplesyou will be too small for staplera, then making one shot, they will fly out one after another in turn. Due to the incorrect size inside tooland a skew may occur. This will cause poor performance of the unit.

Charging a mechanical stapler

With mechanical staplerom is quite easy to operate. You need to know how the charging process works. It includes several steps.

•    The unit must be put on safety.
•    At the back of the equipment, you need to fold back the flap. Behind it there is a groove for staples.
•    From this area you need to pull out the rod with the spring.
•    Block staples should be turned with their backs towards the handle and inserted into the groove.
•    Return the rod to its original position. It is necessary to perform the clamping staples inside toolA.
•    The door must be slammed shut until you hear a characteristic click.

Charging a pneumatic furniture stapler

The pneumatic device differs from other models by its good impact force, high reliability and speed of operation. To use it, you need to additionally take a compressor.

This type is not suitable for standard household chores. It is better to use a simpler model.

To charge a pneumatic gun, you need to do the following.

• The unit is locked. This will help prevent it from being turned on accidentally, so press the button that opens the tray where the staplesy. Depending on the model, the tray lid may open or the tray may slide out of the handle on its own.
• Please double check that stapler continues to stand on safety.
• StapleYou should place them in the tray with their legs facing you. After installing them, check that they are lying flat.
• Close the tray.

Working side tool should be turned over to the material.

To carry out home furniture repairs, mechanical ones are better suited stapler. For larger projects, it is worth choosing an electric model. When opening your own production, it is recommended to purchase a pneumatic one. The type should be selected based on the planned type of activity. This is the main parameter.

It is only important to observe safety precautions. Put the unit on the safety lock beforehand.

VIDEO: Types and applications of construction staplers.

VIDEO: How to charge a furniture (construction) stapler.