We make an original kitchen with our own hands from furniture boards

When buying their own home, every happy owner faces the question of how to improve the apartment. Unfortunately, it is not always possible to place all the desired furniture on the purchased square meters. The space in the rooms becomes significantly smaller, despite the fact that in most cases the goal is to maximize the useful area of ​​the premises. Today, an impressive number of factories and stores offer furniture for every taste and budget, but it does not always meet the minimum safety requirements. And such a pleasure is quite expensive.

Of course, you can contact a workshop where they will not only be able to assemble the furniture, but also help you make competent sketches and drawings. But again, it will not be cheap. Therefore, more and more people are taking on the manufacture of cabinets, shelves, etc. on their own. Making furniture with your own hands is an impressive approach to furnishing living rooms in terms of adequacy and reasonableness, and at the same time a good way to diversify the interior of an apartment. The best option for making a cabinet, wall unit, as well as drawers and shelves will be a furniture board. This type of material is especially often used to create a cabinet for the kitchen. The kitchen is the place where the family gathers every evening for dinner, shares the events of the day. Therefore, it is very important to maximize the usable area in the room, without overloading it with furniture, leaving more free space.

REFERENCE. Furniture board is a material based on natural wood. It is produced by gluing bars under pressure. There are several varieties on the market made from various types of wood: spruce, beech, oak, pine. It is used to make components, boxes, shelves, etc.

The benefits of DIY furniture

Constructions made at home with your own hands from furniture board have a number of advantages over factory samples. Here you will not need expensive equipment, for this it will be enough to have a regular tool that any owner can find. You just need to show a little ingenuity, patience and a creative approach to the issue - and here you are already a happy owner of a modern and roomy wardrobe or a beautiful dining table for the kitchen. So, let's consider the positive aspects of furniture made from this material.

• Aesthetically attractive appearance. Furniture constructed from wood significantly wins against other materials and will decorate any room.
• Safety. As mentioned earlier, it is made from various types of wood, environmentally friendly material without hazardous impurities and harmful components.
• High repairability. Is the door broken, the shelf slanted, the tabletop damaged? No problem. No need to go to a workshop to repair your favorite cabinet. You can do it yourself with minimal financial investment in repairs. It is much easier to work with a furniture board than with the same chipboard, due to the fact that wood forgives some chips and inaccuracies.
• Low cost. The furniture board is not inferior to furniture made from a cut of wood in all characteristics. At the same time, cabinets, kitchen tables and shelves look no worse and are distinguished by durability and ease of use.

Selecting a design and possible nuances

First, you need to decide on the design of the cabinet or table. You need to take into account the free space in the apartment that can be used. The next step will be to create sketches and drawings. If you cannot develop a project yourself, then there are a large number of drawings for various design options on the Internet. Based on the finished plan, detailing is done, and the amount of material required is calculated. In addition, the design plan will help you decide what size furniture boards are best to buy, how to cut them in order to minimize the amount of waste.

Do not forget about the varnish, selected individually. Due to the fact that the furniture board is still wood, and wood needs special care. In order to prevent deformation, swelling of the surface, soaking (this is especially important for kitchen furniture), it is necessary to purchase varnish and cover the surface with it at least 2 times. In addition, the varnish will protect the surface from the negative effects of ultraviolet rays and give a presentable appearance. Today, the construction market offers a variety of varnishes, not only in a variety of colors, but also textures. The same can be said about stains, which are successfully used in the processing of wooden products.

To make almost any design at home, you won't need a lot of expensive tools. Every homeowner is likely to have a screwdriver, grinder, hacksaw, and electric drill in their arsenal. With this set of tools, you can easily assemble almost any furniture for your home.

The order of work in the manufacture of a cabinet

You can assemble a cabinet with your own hands using the simplest model as an example. This is a classic two-door cabinet made of a kitchen cabinet board with no vertical partition. Despite its small size, such furniture can be very roomy and ergonomic. After carrying out the preparatory work for the manufacture of the future cabinet, you will need to cut out all the necessary parts and pieces. This procedure is performed using a jigsaw and an electric saw. To assemble a two-door cabinet, you will need:

• doors – 2 pcs.;
• 2 side walls;
• bottom;
• 1 back wall;
• the required number of shelves (shelf size may vary).

When all the main parts and the frame are ready, you can start assembling. First, you need to take into account the drawers and shelves that will fit into the cabinet. For this, it is recommended to leave 775 mm of width when cutting the sheet. Next, you need to fasten the 2 side parts of the wall and the bottom with self-tapping screws. It is best to fasten the structure at a distance of 50 mm from the floor. After the manipulations have been carried out, you need to start sawing and installing the shelves and drawers. The best option for this is a narrow furniture board, the holes in which are best made with a step of 100 mm. This is done to avoid deformation of the material during assembly. When the drawers and shelves are ready, they must be screwed into the cabinet itself with self-tapping screws. Next, you need to install the lid on the frame, fix the back of the wall and fix the base on the corners. As for the doors, it is recommended to use a surface of at least 400 mm in size. Holes for the hinges are made in the sashes, the doors themselves are fixed with self-tapping screws to the side walls.

Assembling a desk from a furniture board

There is nothing complicated in making a multifunctional, compact and comfortable desk from a furniture board with your own hands. As in the case of a cabinet, before starting to make the structure, you will need a sketch and a drawing of the desired type. For manufacturing, you will need:

• square;
• plywood (thickness should not exceed 20x20 mm);
• parts of timber and plywood.

To assemble the optimal version of the table, it is necessary to take into account all the nuances and calculate the required number of niches, shelves and drawers. The size is selected in accordance with individual preferences and the capacity of the room. It is better to start making the table with making the tabletop. To do this, you will need to use a large board and cut a blank out of it. Pay special attention to the corners of the tabletop, which must be processed and reinforced with bars before assembly. After processing the corners of the tabletop, it would not be superfluous to round off the most protruding parts. This will not only give the table an aesthetically attractive appearance, but also make it less traumatic for all family members. After the tabletop, you need to start making drawers, shelves and doors. Two squares measuring 70x70 are cut out of plywood and cut in such a way that they form 4 triangles. These elements are placed on the back of the frame wall. Based on the finished drawing, shelves and drawers should be placed in specially designated places on the table. The drawers need to be screwed into the almost finished part of the structure with screws, after which you can start installing the doors. The structure needs to be varnished, preferably in 2 layers. The final stage in the assembly will be the installation of the previously purchased fittings, and the desk is ready for use.

Computer desk made of shield

In this case, the principle of making the table is slightly different from the previous one. It is necessary to use 3 sheets, the size of which will be 2000x200x18 mm. This is the most optimal size due to its strength, and therefore durability. When making the table, you will need:

• edged board (size can be selected as desired);
• plywood parts.

As with the desk, before assembly, work should begin with preparing the tabletop, which is cut out of the board in accordance with the previously taken measurements and the prepared drawing. It is recommended to make two small recesses on the side surfaces in order to place the table strictly against the wall, avoiding unnecessary gaps along the edges of the tabletop. On the vertical wall, the best option would be to install a transverse panel. Installation is carried out with self-tapping screws on the frame. The transverse panel and the presence of plywood will help to give the table rigidity and strength. After this, a frame is made for shelves and drawers, parts of which are attached to the finished structure. It is preferable to make as many drawers as possible on this type of furniture for greater capacity. To build upper shelves with the required number of drawers, the board must be sawn, attaching it to the tabletop with self-tapping screws. For drawers and shelves, it is better to use roller mechanisms. As for the part under the keyboard, it is made of a board, the size of which is 40 mm. Next, it makes sense to start installing the doors. After preparing all the components, they should be varnished, after which the final assembly takes place.

In conclusion

As you have already understood, making furniture for your home with your own hands is not only an interesting activity, but also quite simple. You only need to arm yourself with patience, inspiration, the necessary number of necessary tools, make the necessary calculations and drawings. Based on the desired dimensions and design, it is possible to make almost any type of structure for the home. A wardrobe, desk or kitchen table, which you can easily make with your own hands, will meet all your requirements and harmoniously fit into the overall home environment.

VIDEO: DIY Kitchen. Solid wood (pine) Kitchen made of furniture board. Kitchen cabinets..Part №1

50 photo ideas: DIY kitchen from furniture boards