Hanging kitchen cabinets on a mounting rail: work order, photo

Kitchen design today is striking in its diversity. There are many ideas for kitchen decoration. Every woman strives to create a cozy atmosphere in the house, and in the kitchen - especially. For the hostess, it is like a study, where she spends most of her time.

Any woman knows how difficult it can be to create coziness in the kitchen, to put everything in its place, if there are no various hanging shelves, lockersThat's why they came up with kitchen walls, which include multifunctional tall units, various types of stands, cabinets, hanging cabinets.

Let's take a look at how to hang kitchen cabinets correctly.

Content

Necessary materials and tools
Nuances of choosing fittings for fastening
Don't forget to prepare the walls!
Initial stage of work: how to determine the suspension height?
Hanging on a mounting strip (rail)
How to secure the "hinged-mounting bar" mechanism?
Useful Drilling Tools
VIDEO: Fastening wall cabinets in the kitchen.
Wall cabinets in the kitchen interior – 50 photo ideas:

Necessary materials and tools

These pieces of furniture are of great importance. They save space in the kitchen, have sufficient capacity. They hold a lot of things. Therefore, it is necessary to make high-quality and thorough fastening to the wall. Before starting work, you need to prepare materials and tools:

A base to secure objects to.
Hinges for the facade.
Elements required for construction cabinets.
Self-tapping screws, nails.
Inter-section ties.
Tires.
Hangers and screws to install them.
Drill. If the wall is concrete, you need a drill with a hammer drill function.
Tape measure, pencil, ruler.
Level, preferably long.
Screwdriver, screwdrivers.
Drill bits, screwdriver bits.
Hammer.
Clamps, hacksaw.
Open-end wrenches.

tools — After you have purchased all the required materials, you need to prepare the walls for installation and make markings.

Nuances of choosing fittings for fastening

There is no need to wonder how to hang closet in the kitchen, because today there is a large selection of various fittings. But there are some features. If you hang on a wooden wall, it is better to use hardened screws with a countersunk semicircular head. Screws with a double-thread and a large pitch are worth paying attention to.

hang kitchen cabinets — The most important thing when choosing fasteners is what the wall is made of.

If the wall is made of brick or concrete, use dowels and plugs, anchor bolts, plaster and row bolts. For a plasterboard wall, it is better to buy Molly dowels.

Don't forget to prepare the walls!

Before hanging lockers, you need to prepare the walls by doing some work:

It is good to level the base, since unevenness will have a negative effect on the entire installation;

Use plaster or plasterboard sheets.
It is imperative to complete all work on installing sockets and lighting;

These points will form the basis for the work ahead.
On the walls should paint, wallpaper, tiles have already been applied. If this is a new building and the house may shrink, it is better to use a plastic kitchen apron. It will easily hide unevenness and is attached with liquid nails or screws.

After hanging the cabinets, painting the walls will be quite problematic.

Initial stage of work: how to determine the suspension height?

Before you start fastening lockers to the wall, it is necessary to correctly determine the height of their hanging. Approximately the gap between the table top and the bottom part cabinets equals 50-60 cm, and according to GOST – 45 cm. If you will mount lockers over the refrigerator or high oven closet, then their height will show the required hanging point.

Also should take into account the quality of the wall partition. In modern houses, it is most often made of plasterboard. In this case, do not hang closet too high – the wall may become deformed. In old buildings, the floors may also be dilapidated. The walls will not bear such weight and will crumble. In this case, the furniture may fall, and you will be forced to repair it or buy new ones.

how to hang cabinets — To prevent heavy loads on the floors, you must install auxiliary supports and metal frames.

In most cases, the height of the suspension can be influenced by design innovations. We are talking about facade kits, where everything you need is included in the set, and this is very economical.

hang cabinets in the kitchen — The instructions indicate what height the suspension should be.

Hanging on a mounting strip (rail)

Before you start hanging kitchen cabinets, You should remember that there will be a gap between the furniture and the wall. The gap should be the same both at the top and at the bottom. It is necessary to install an additional strip at the bottom cabinet.

kitchen cabinets on rails — You can attach it at a height where the bottom of the furniture “goes” onto the kitchen backsplash.

This type of canopy has a number of positive aspects, if you were hanging it on loops and hooks. Firstly, it is very easy to make markings for the mounting rail, installation lockers can be produced with high precision. Secondly, the hangers can be adjusted, and dismantling and installation will be quick and easy. Thirdly, cabinets form an even row, without any gaps. Fourthly, the ability to withstand any loads, here they are distributed evenly.

But there are also several disadvantages to this type of canopy:

Such a set - attachments and a rack - is not cheap. But this is probably not such a serious obstacle, because the time savings are significant;
Gaps are formed between the wall and the furniture.

wall cabinets — Despite this, this method is considered the most acceptable and is within the power of any master.

How to secure the "hinged-mounting bar" mechanism?

To start hanging kitchen cabinets, you need to mount the hooks to the side walls of the furniture. To do this, use the adjusting screws. Hook must have a projection beyond the back wall locker just enough to catch on the mounting rail – 2-3 mm. Then we make even markings, mark the places and drill the holes correctly. For the work we use a drill and the appropriate attachment.

fixing cabinets — It is important to remember that the bar should be located below the edge of the cabinet.

If you want to save money, you can arrange the slats in small sections - about 10 cm, but only on condition that the wall is sufficiently reliable.

wall cabinets on slats — All the work can be done independently, without anyone's help.

We drive dowels into the prepared holes that match your type of wall and securely fasten the mounting strip. Now you can hang cabinets on the planks, having removed all the doors and shelves beforehand. Then we will carefully adjust the modules using screws in the hangers. The furniture is connected to each other using an inter-sectional tie.

fixing cabinets in the kitchen — Once the work is completed, you can attach a decorative cornice, install shelves and hang facades.

Useful Drilling Tools

A jack of all trades always needs certain tools for work in a private house, on a summer cottage, in an apartment or when building your own house. Many of them are not even worth buying if they do not require constant use. For example, there are many different attachments for drilling that will greatly increase the functions of your drill and significantly expand them.

drill with attachments — Let's look at some devices for auxiliary potential.

To obtain precise holes of significant diameter in different workpieces, a device such as drilling and milling attachment.

The next device worth mentioning is very expensive, but it has the highest versatility. All the tools you have in your household, be it knives, shovels, axes, hoes, various drills, you will sharpen playfully with universal sharpening device.

sharpening attachment — When purchasing drill bits, be sure to check their compatibility.

Holder with clampWith its help you can fix the drill anywhere, use it with various devices, use it as a mini-lathe, sharpening, milling or grinding and polishing machine.

Clamp attachment — The drill holder provides quick fixation of the drill.

There are also all kinds of attachments for drills. These can be stops, limiting the drilling depth, platforms, with which you can drill at a certain angle or perpendicularly. There are attachments that are adapters And extension cords different designs: offset, angular, flexible.

Angle drill attachment — The angle adapter for a drill is designed for hand and electric drills.

Metal cutting attachments will turn your drill into a one-of-a-kind tool. Some resemble sheet metal shears, while others have a different feature, such as roller shears. Nozzle, called "Cricket", as if cutting through metal.

cricket attachment — The main advantage is that they do not damage the polymer coating of the metal.

There are also other attachments designed for single-type work.

For installing aluminum rivetsThere are types both for the same size and those with replaceable bushings for different calibers.
Tape attachment for self-tapping screws. With its help, you will save a lot of time when working with plasterboard partitions or when you need to fix other materials with screws.

Maximum time savings when driving screws in series.
Belt sanding attachment It can easily replace a grinding machine, and will also be much cheaper.
It wouldn't be a bad idea to get an attachment that will turn your drill into a hammer drill..

It represents its striking unit.
Using "angle pruner" attachment, you can cut various cables, as well as tree branches.
Using a variety of attachments, the drill will replace your jigsaw, circular saw, pump, you can polish surfaces, sharpen drills.
There are some unusual attachments.

They can be used to sharpen pencils, clean fish, and pluck birds.