DIY Chipboard Furniture Restoration: Step-by-Step Instructions

There are many apartments and private houses where furniture made of chipboard gradually acquires a non-marketable appearance. To put a wardrobe, chest of drawers or table in order, it is not at all necessary to contact specialists or change things for new ones if they are familiar and comfortable for the owners of the home.

kitchen furniture restoration — High-quality furniture restoration is a labor-intensive and time-consuming process.

Old furniture can be restored using improvised means available in the house. Additional materials and tools can be purchased at any hardware store.

Second life of old furniture — If necessary, you can contact specialists, or you can study all the intricacies and do it yourself.

Content

The benefits of DIY restoration
Methods of restoration
Materials and tools needed for the job
Restoration process: step-by-step instructions
Finishing the product – decoration
VIDEO: Restoration and decoration of an old Soviet-era kitchen CABINET
50 photo ideas for restoration and design of furniture from chipboard

The benefits of DIY restoration

Restoring the appearance of chipboard items is a low-cost process. In addition, it has a number of undeniable advantages:

no need to take a cabinet or table to the workshop;
all tools are usually at hand;
You monitor the progress of the work yourself and make adjustments if necessary.

Restoration of old furniture — By selecting the right materials and studying master classes, the updated table or cabinet will delight you with its appearance for many years to come.

When restoring, you do not use the help of expensive specialists, you can estimate the costs and labor yourself. The process develops household ingenuity, and sometimes unites fathers and children if you involve the latter in joint work.

Methods of restoration

It is important to understand what material you are dealing with. Wood-resin pressed mixture is the basis of the board. The easiest way to restore the fresh look of chipboard is high-quality painting.

DIY Furniture Restoration — Natural crushed material is mixed with synthetic resins and hot pressed.

Restoration of chipboard furniture by tinting, varnishing and decorating allows you to renew the facade and interior surfaces of the furniture. In this form, it will serve for a very long time. The main materials for restoration are paints, varnish, sandpaper.

Restoration of the wall — Chipboard (particle board) is made from shavings of coniferous and deciduous trees.

The second method, which is not too time-consuming, is using sticky film in natural tones. It does not require glue – its base is quite durable, the film adheres and smooths out over the surface very well.

Materials and tools needed for the job

You will need different materials when working. To disassemble old furniture, you will need a screwdriver. Glue is needed only if the surface was previously coated and it has come off. To clean the surface from unevenness, you will need sandpaper and a spatula.

Wardrobe Renovation Idea — The slab produced in this way is resistant to aggressive environmental influences and has excellent noise and heat insulation properties.

Updating the color will require the following:

aerosol paint;
hair dryer;
tassels;
rubber gloves.

Restoration of an old nightstand — The easiest way to update a cabinet or table is to simply repaint it.

Before starting the restoration, the slab should be degreased using a cleaning agent.

Sometimes putty for wooden surfaces is used, since the wood can dry out - for further work it is necessary to seal small cracks and crevices.

Old furniture before and after restoration of the chest of drawers — This type of furniture restoration will help you get rid of minor scratches and change the boring shade.

Using varnish as a finishing coat can help to achieve a more impressive look for the restored item, so its use would not be superfluous.

Materials may vary depending on the scope of work, vision of the final result and restoration method.

new life for furniture — If there are significant defects on the surface, it is better to choose another method.

If you plan to insert fabric, wallpaper, decoupage napkins, or film, then you will need scissors.

To quickly dry painted surfaces, you will need a powerful hair dryer - it is better to use a construction hair dryer.

Idea to update furniture — Chipboard is a specific material, and it needs to be painted using a special technique.

Restoration process: step-by-step instructions

Use the help of household members if they have restoration skills. Maybe they will tell you how to quickly restore chipboard with your own hands.

Prepare the tools and necessary materials – everything should be within walking distance. Since the process is going to be labor-intensive, it is better to carry out the work on a day off.

Painting

Step 1: Carefully disassemble the furniture using a screwdriver.

Step 2. Degrease the surface. Sand down any unevenness and roughness with sandpaper and a spatula. If necessary, fill in cracks and cavities with putty. Let the boards dry.

Step 3. Apply the tint evenly (preferably acrylic paint) to the surface of the elements using an aerosol. If necessary, apply 2-3 layers, taking breaks to dry them.

Step 4: Apply the varnish and let it dry. Seal it by applying another coat.

The paint will lay evenly if there are no drafts in the room while it dries.

If you decide to use another method - gluing the film, then the materials are quite inexpensive. Glue is not used for this work - the back side of the film is sticky.

Mirror from a window frame — It is necessary to paint each element separately, this will allow you to more thoroughly work on all the joints and avoid the formation of drips.

Restoration of a chest of drawers in the Provence style — After drying, all facades should be wiped with a weak vinegar solution. This treatment will remove the thin fatty film that will prevent the adhesion of the board and the self-adhesive film.

Step 1: See steps 1-2 of the painting instructions.

Step 2. Measure the amount of film accurately. It is better to make a small allowance, as the axes may be uneven. You can remove it later by carefully cutting it with a stationery knife.

Step 3: Smooth out the pasted area with force so that there are no air bubbles.

It is better to choose a film of a natural color - shades of wood, light or dark, depending on which you like best. The advantage of the film is that it can be washed repeatedly - a high-quality coating does not lose color and does not form streaks.

Complete restoration of wooden furniture — If the furniture was previously painted, the paint can be removed using special solvents or sandpaper. It will be more difficult to dismantle the coating if the facades are covered

Finishing the product – decoration

Old furniture can not only be refurbished, but also decorated, giving it an original look. Drawings or ornaments are used as unusual design elements. To apply the print evenly, use a stencil cut out of thick paper or a file folder. Apply the paint very carefully so as not to splash the areas around the ornament. It is better to place it along the perimeter.

restoration of furniture painting — To ensure that furniture restoration meets expectations, the coating must be applied carefully, avoiding the formation of gaps and drips.

A large, muted pattern looks good on large central areas or at the bottom. At the top, it will “weigh down” the visual space. You can also use a combination of contrasting colorful elements – single-color side panels and decoupage parts with plant or thematic patterns.

Furniture restoration and painting — The DIY furniture restoration is almost complete, all that remains is to bring the new coating to perfection.

You can also decorate chipboard with your own hands using appliques made of self-adhesive film or fabric.

Restoration of Soviet furniture — If a defect is discovered after drying, the problem area should be sanded again and covered with an additional layer of paint.

Carved elements should be introduced into the overall design with caution - the plate is very fragile. When carving, it is necessary to use a sharp cutter and sandpaper to clean the recesses. We recommend that you first make a sketch of the future ornament - this way you can evaluate the aesthetics of the future decor.

Lacquered table before and after restoration — Often a solid and reliable table is sent into exile to the dacha only because its design is hopelessly outdated.

You can freshen up painted furniture even more with wallpaper or patterned fabric. Such inserts look interesting on the fronts of tables, pedestals and chests of drawers. In this case, you will need glue. The fabric should be waterproof, thin fabric will quickly become soaked and will look sloppy. This method is suitable for updating furniture in summer cottages, apartment kitchens, bedrooms and children's rooms.

Restoration of an old chest of drawers — But any furniture can be given a second chance, it is enough to modernize its appearance, and external restoration will help with this.

The materials listed can also be used to decorate interior surfaces – walls and shelves. This does not require much effort, and the result often exceeds expectations.

When using decorative elements to decorate large items, don't miss the opportunity to add the same stylish touch to the rest of the decor. For example, you can enhance the harmony of colors by covering the seats of old chairs with the same fabric that was used to decorate a cabinet or table.

repurpose an old nightstand with new paint — The main thing is to purchase high-quality materials, carefully study the step-by-step work plan and follow all recommendations.

Victorian or Provence style napkins are often used to decorate chipboard items. Pastoral elements perfectly refresh the interior, making it light and bright.

Decorating is also done using certain paints – gold, silver, copper. They make the furniture more refined. They can be complemented by an impressive looking craquelure. This will require a special varnish. This method is perfect for classic interiors, where there is a lot of vintage furniture of unusual shape.

extraordinary transformations of old furniture into new — The easiest way to update a cabinet or table is to simply repaint it.

Small mosaic inserts made of colored glass or plastic, glued to the facade, will give a wardrobe or bedside table a new look.

remake of soviet folding table — The main thing is to know what material to use and how exactly, and then the restoration of furniture with your own hands will be completed quickly and with an excellent result.

Coffee tables look unusual with a "kaleidoscope" of newspaper clippings. To make them immobile, glue them to the tabletop. Place them asymmetrically, but maintain the overall compositional harmony. Then cover with glass or secure with two layers of transparent varnish.

Changing the fittings can also add a new note to the appearance of the furniture. Instead of simple handles, choose bronze or silver ones with a relief shape. Or paint them a different color.

DIY Chair Restoration — After all, what could be more pleasant than updating and decorating your home without significant costs.

If the furniture has legs, you can use twine for them, securing it with glue.

An old mirror can be used as an insert in one of the cabinet doors. An oval shape will look better.

Restoration of chairs — But it is not necessary to change your favorite table or cabinet; furniture restoration can help, and you can do it yourself.

The decor should not be too colorful or garishly contrasting. The colors should be harmoniously selected and not irritate with excessive eclecticism.

How to decorate furniture that has lost its former appearance, you need to think in advance. There are a great many ideas, so anyone can make an unpresentable look of a cabinet or table advantageous and stylish, even at home.