There are so many interesting craft ideas on YouTube these days that it's hard to decide which one to do first. Some people prefer to make their own cosmetics, others sew clothes, and others love to create decorative interior elements.
One of the options for decorating the interior is considered to be a pillow-knot. It looks very beautiful, and if you create a large-sized voluminous craft, it is also convenient to lean on it or even put it on the floor, like a pouf.
In this article we will tell you what materials and how you can create such an interior masterpiece. The instructions are quite simple, if you can’t find the materials at home, you can buy them in the store.
Content
How to Make a Knot Pillow Base
The basis is the material blanks. If you look at the photo of the pillow-knot, you can see that it is knitted from voluminous strands. These strands are considered blanks.
Thanks to the blanks, the product looks soft, elastic and voluminous. You can sew a craft from a thick rope or cord, which can be purchased at a hardware store (for example, from twine), but it will not be soft. Such a thing will have a beautiful texture and will look very original, but it is not at all convenient to lean on it - too hard.
To sew the tubes you will need the following materials.
- Soft textiles or woolen, elastic tights.
- Homogeneous sealant.
- A roll of cardboard or a rolled up magazine - for easy filling of the tube with sealant.
- A long ruler or even a wooden kitchen spoon – the master will use it to compact the filler.
- A needle with thread of a matching color.
The easiest way to create a base is to buy several pairs of woolen children's or women's tights. Cut off the toe and the top part - there are blanks, they are filled with padding polyester and each end of the product is sewn together.
If you have old, unnecessary sweaters/knee-highs at home, you can also use them for blanks. If you are planning a large knot pillow, you will have to buy fabric, create a pattern and cut out the required length of the canvas, sewing and filling them later.
Sew according to this pattern.
- Cut the piece of fabric into equal strips twenty to thirty centimeters wide, select the length individually, according to the desired size and volume of the pillow.
- If you need a long tube, and the fabric of the desired color is too short, then just cut two strips of the same width and length, sew them together. For example, sew two strips of a meter, you will get a tube of two meters in length.
- The tube is sewn on the wrong side, using a sewing machine. Then the finished product is turned inside out and stuffed with synthetic padding.
Tip! To make it easier to stuff the tube with filler, simply insert a piece of cardboard from toilet paper or fold a magazine into a tube. Then put the filler in and use a stick to push it in.
Knot pillow: weaving options
There are several ideas, including the popular Celtic pattern. The main thing is that the product looks original, so it is important to choose a complex pattern. This does not mean the complexity of execution, but the appearance.
To avoid any misfires, it is advisable to practice on a regular rope and then transfer the weaving to the intended pillow knot.
There are several options for how to braid a pillow.
- A simple flat knot.
- The Turk's head is a bit reminiscent of a wreath.
- “For good luck” – this knot was invented in China.
- Celtic knot.
These knots are considered the most common in macrame weaving, but it is not necessary to use only these ideas. On YouTube, you can find not only step-by-step instructions on how to make a pillow-knot, but also what weaves exist and which one to choose.
Each knot is original, sometimes the figures are three-dimensional, but flatter ones suit someone. The main thing to remember when doing the work is to buy a sufficient amount of foam rubber or other sealant.
To make the product really soft, pleasant to rest on or to put under your back/neck, fill the tubes with a sufficient volume of sealant. If you find that kinks have appeared during weaving, you will have to steam the tube and add sealant. The finished product with such kinks in the most visible places looks unsightly, so as not to do the work twice, it is better to immediately fill the “boas” with a sufficient volume of sealant.
How to Use Old Tights for a Decorative Pillow
As written above, this is the easiest way to create a pillow-knot. You don't have to measure the fabric, then cut it, sew it on a machine or by hand, turn the workpiece to the front side - these stages take too much time. Although, the result is worth it.
It is much easier to buy tights of soft, elastic fabric, preferably with the addition of wool and elastane. Then prepare the blanks - cut off the toe and the upper part. Two tubes are obtained from one pair. They are also stuffed with padding polyester and sewn with a neat seam at each end of the tube.
The resulting tubes are quite long, but if you need longer ones, both parts are folded together so that you can then fill the tube with a sealant. Then the blanks are tied into a knot of your choice, the product is secured and used to decorate the interior.