Decorating with textiles helps to quickly update the interior of a room and add fresh notes to it. Curtain tape has become widely used for window decoration among designers, sewing masters and housewives. Read on in the article about how to sew curtain tape to curtains.

how to sew curtain tape
Not only the beauty of the fabric of the curtains, but also the way they fall down, forming soft, even folds, decides a lot.
curtain tapes design photo
There are many fittings that help to quickly and effortlessly hang curtains on the window, and at the same time give them original and elegant assemblies.

Curtain tape for curtains and tulle

Curtain tape resembles a ribbon and can be white or colorless. Along its entire length, parallel strings are drawn, and in the middle there is a dense layer with loops for hanging curtains to a fixing device.

how to sew curtain tape photo
Curtain tape is made of fabric strips of different widths, along the entire length of which thin ropes or cords are stretched in one or several parallel rows.
unusual curtain tapes
The material for curtain tape can be either natural or synthetic fabrics of different densities.

Curtain tape is a special type of soft decorative fittings used to form folds of various sizes and shapes. It is a kind of frame for all variations of assemblies. With the advent of tape, it has become much easier and more convenient to fasten curtains. There is no longer a need to attach metal clips that damage the base or sew on loops manually. In total, there are about 70 types of tape.

how to sew curtain tape ideas
In the middle of the tape there is a denser layer with loops designed for hanging curtains on the baguette, and the strings are used to create gathers of the desired shape and size.

They differ in the following characteristics.

  • Fixation methods. These can be eyelets, loops for hooks, strings, pipes, and also sticky stickers.
  • Configuration of the folds. There can be many options here, depending on the customer's wishes or the author's imagination.
  • Dimensions. Standardized tape is considered to be from 1.5 to 10 cm. More popular are 2.5 and 6 cm.
  • Material. Fishing line is used for draping airy organza and veils, and polyester, cotton and paper are used for thicker, weightier textures.
curtain tapes types and application
After tightening the laces, folds will form on the surface of the curtain, which can be given the desired shape.
how to sew curtain tape design
To remove the curtains, you just need to untie the laces and straighten the tape.

IMPORTANT! Curtain tape is sewn from both natural and artificial materials of varying density. Tape sewn from rigid materials holds its shape perfectly.

How to sew curtain tape to curtains: step-by-step instructions

In order to attach the tape and hang the curtains without any mistakes, you need to know the methods of attaching them to the cornice. The wrong choice of the hanging method can harm the author's idea and spoil the design concept. In addition, this is often the reason for the collapse of the entire mechanism. In construction hypermarkets, you can see a variety of cornice samples. However, the most popular are products made of metal, wood, as well as ceiling and string models.

how to sew curtain tape photo on curtain rod
Curtain tape makes window decoration much easier, especially since you can easily sew it on yourself.

The methods for attaching curtains to them are as follows:

  • Rings. The most budget and common method of fastening. In addition, they are often included in the basic set.
  • Drawstrings or pockets located along the top line of the curtain. Designed for fastenings with a circular slit.
  • Clothespins. Suitable only for weightless materials.
  • Clips. They are similar to clothespins, but lack teeth. They are designed for weightless textiles. Some subspecies are equipped with locks and can have designer processing.
  • Textile loops are made from the same material as the main product or similar to it.
curtain tape attachment option
Made from rigid fabrics, the tapes retain their shape very well.

Next, using photos and step-by-step instructions, we will consider how to sew a ribbon to a curtain. This master class will be useful for both beginners and more experienced craftsmen.

How to hem a curtain and sew a curtain tape to it

First, examine whether the seller of the product has cut the panel clearly. If there is an image on the surface, there will be no difficulties. In order for the curtain to hang evenly, the edge must be aligned so that it runs perpendicular to the grain line. You can conduct a small experiment. Fix the entire piece to a large wall and evaluate whether there is tension on one side upward. Then, by trial and error, determine the position in which the fabric hangs evenly.

how to sew curtain tape design photo
With the help of curtain tapes, you can create various patterns on the fabric of curtains or tulle using soft draperies.

Follow the instructions below to learn how to hem curtains and sew on curtain tape:

  1. Iron the fabric and process all the edges of the cut. Usually, a double hem is made at the bottom. This method of hemming makes it easy to shorten the product without trimming, since double hemming will remove up to 30 cm of material.
  2. Before sewing on the ribbon, process the upper edge. It is folded to a certain value and ironed. At the same time, in order to prevent unpleasant surprises, the degree of thinness and texture of the textile are taken into account.
  3. Then we make a marking with our hands, having first folded the tape a couple of centimeters and secured it with tailor's staples.
  4. We sew on the machine. The exact number of seams depends on the parameters of the tape: for narrow ones - 2 lines on both parts, for width up to 12 cm - 3 lines with an auxiliary middle one, and for wide ones - 4 lines.
  5. After the ribbon is stitched, we pull the strings and begin to create the intended pattern. It is not recommended to cut the extended cords: they are made into knots and then hidden.
sewing on curtain tapes
The value of curtain tape also lies in the fact that you don’t need to sew on the loops by hand.
Application of curtain tapes
The process of tightening the gathers occurs quickly, while forming even and desired folds.

IMPORTANT! Most seamstresses make a tiny pocket that serves a special purpose – hiding excess strings and their knots from view.

How to sew a ribbon for hanging curtains on a ceiling cornice

Hanging curtains on the super-fashionable ceiling cornices is difficult and labor-intensive. They are equipped with special hooks for hanging. For curtains, it is necessary to use a mounting tape.

option for hanging curtains on tapes
At the same time, fabric of any density drapes beautifully.

To ensure that the work is carried out flawlessly, follow the suggested algorithm:

  1. Check the strength of the tape fastening to the fabric.
  2. Pull the strings out, gather them and tie them at one end. This is done to reduce the width of the curtains and form clear folds.
  3. Attach the hooks to the curtain by connecting them to the specially shaped loops sewn into the mounting tape. Keep a distance of 10 cm between them.
  4. Then attach the fasteners to the cornice.
  5. After completing the work, check the strength of the fastenings to the cornice.
  6. Next, you will need to fasten the places where the curtains are attached in a questionable manner, or eliminate the defective components.
how to sew curtain tape and hang curtains
Using tapes, you can change the length of the curtains without cutting them, by attaching hooks to another row.
how to sew curtain tape photo
The variety of curtain tapes is great, there are approximately 70 types.

If there is an installation error, the curtain may break in an unexpected situation, for example, in a classroom during a lesson. Therefore, for general safety, it is necessary to make calculations correctly.

How to sew curtain tape on curtains

The assembly coefficient in the example under consideration is taken to be minimal, therefore the curtain tape should be narrow and dense. The only devices required from the tape are hooks. To sew the curtain tape to the curtain, you should carefully select threads to match the blackout fabric. This will make the future seams as invisible as possible on the front side of the canvas. Many people make the mistake of buying fittings before the canvas is selected. You can go shopping for tape when the curtain is already available. It is important to make sure that the tape is long enough to take into account all the folds and nuances of the cut. However, it is better to buy tape with a reserve.

how to sew curtain tape
Tapes can be transparent or opaque.

The sewing instructions are as follows:

  1. First, hem the sides of the curtain.
  2. Next, take the curtain face up and place the ribbon on it, also with the front side facing up. The folded allowance should be sewn to the wrong side.
  3. Place the first seam along the edge of the tape.
  4. At the end of the line, also fold the seam allowance inward.
  5. Turn the curtain inside out and fold the tape onto the curtain so that there is 0.5 cm from the edge of the tape to the fold. The allowance is necessary to hide the hooks behind the curtain.
  6. Make a second line along the edge of the tape. The front side should look even and neat.
how to sew curtain tape
A tape with fastening loops for hooks can have not one, but several rows with loops.
curtain tapes in the interior
Simple folds are created using tapes with two rows of loops, while tapes with 3 or 4 rows are used to create a decorative top part of the curtain.

Additional information! It is important to know that small bundles are built into the tapes, with the help of which the structure is pulled to the desired shape. You cannot sew along the bundles if you plan to use them later.

How to sew tape to tulle

In this version, a thin ribbon will do. First, you need to calculate the parameters of the tulle and braid. This is easy to do by multiplying the length of the cornice by the material assembly coefficient, adding 25 cm for deformation and processing.

tulle with curtain tapes
There are also such types of tapes as a column, which forms 1 to 2 gathers, and an Austrian tape, which forms various patterns and forms folds in “puffs”, “butterflies”, “glasses”.
narrow curtain tape
A tape of 1.5-4 cm is considered narrow. It is necessary when the cornice is covered, when the hooks are covered with a special decorative strip.

When choosing a wide ribbon, follow the following sequence of actions:

  1. Carefully process the tulle on all sides, except for the top. If the material is loose, then additionally overcast it on the overlock. You can step back three threads and cut straight.
  2. Fold the tulle over the top with the wrong side to the width of the curtain tape and iron.
  3. Place the tulle tape on the finished hem, leaving 1.5 cm from the fold. The more complex the folds, the greater the distance required. Make sure that the tape does not protrude beyond the edge of the fabric.
  4. Pin the ribbon and baste it to the tulle.
  5. Machine stitch the tape. The number of stitches should match or be greater than the number of rows on the tape. To avoid creases, the material should be slightly stretched and always stitched in one direction.
  6. Process the side edges and remove the basting.
curtain tapes application photo
Narrow tape is also used for short curtains made of lightweight fabrics.

If the tape is narrow, the top edge is folded inside out by 2 cm, and then overcast by hand. The curtain tape is fixed with pins 5 mm from the top edge. Then sewn in any convenient way. It is important to remember that the loops should be on the outer part of the tape to secure the hooks or rings.

how to sew curtain tape ideas photo
Just as there are many types of curtain tapes, there are also many options for decorative types of folds.

Please note! When working with tulle, it is necessary to avoid unnecessary holes from needles and pins, as the material may become deformed. Tulle is a flexible material, and many beginning seamstresses begin to "get their hands on it".

How to sew tape to curtains to cover the curtain rod

There are situations when the ribbon needs to be positioned so as to cover the cornice. This is done to mask the flaws of the product or trim, for decorative purposes. After all, alteration is sometimes impossible or difficult to do. To do this, place the ribbon on the prepared piece from the inside so that it is not visible from the face. Usually it is sewn 0.3-0.5 cm below the end of the material.

how to sew curtain tape covering the cornice
To cover the cornice, the ribbon is fixed even lower.

Also consider the following recommendations:

  • Leave some extra tape along the edges and secure the cords with a knot.
  • Add an extra stitch in two or three places to create rigidity and give the top an elegant flounce.
  • Glue the sealant (doublerin), if the material allows it. Light fabrics easily catch fire when ironed and leave unsightly marks.
  • Don't forget to put the curtain on the bottom row of hooks, then it will rise and cover the fastening. If there is a single row of loops, then the tape should be re-stitched with the loops down.
  • Check the ratio of the width of the product to the length of the cornice. The more the fabric is pulled, the denser the comb will be.
how to sew curtain tape photo ideas
Curtain tape makes the technology of decorating textile products much easier.

With its help, you can create various patterns and spectacular draperies on curtains. It is quite easy to sew a tape on a curtain at home with your own hands, if you have all the materials and sewing equipment for this.

curtains with curtain tape
The curtain can be hung on a curtain rod.

VIDEO: How to sew curtain tape.

50 beautiful examples of curtains in the interior: