How to drill a hole in a mirror at home

There are times when you need to rehang an old mirror or hang a new one. To do this, you need to make a hole in it. This must be done so that it does not crack, does not burst, in a word, remains intact.

mirrors — In some cases, it is necessary to make a hole in a mirror to hang it on a wall or for other purposes.

In essence, a mirror is the same as glass, only one side has a special composition. To make a hole in it at home, craftsmen use the same methods as if they were working with glass.

drill glass — This material is very fragile, so when drilling a mirror at home, you need to be very careful and attentive so as not to damage it.

Of course, such drilling is not often done at home. But if the need arises, most people are confused and do not know how to do it correctly, because the material is quite fragile.

mirror drilling — Essentially, a mirror is glass that is coated on one side with a special compound.

In fact, everything is quite primitive, any master can handle it. You need to follow the rules and do the work carefully.

mirror — Therefore, to make a hole in it, you can use the same methods as when working with glass.

mirrors in the hallway — Glass (as well as mirrors) is a very fragile material, so drilling skills in concrete or metal are not applicable.

Content

Method of drilling holes in glass and tile fastening
Necessary materials and tools
Drilling process: step by step instructions
VIDEO: Drilling a hole in a mirror.
Mirrors in the interior – 50 photo ideas:

Method of drilling holes in glass and tile fastening

Let's figure out what kind of drill is needed for this procedure. Tools designed for wood or metal work will not work, glass may burst. To drill a mirror or glass, there are special drills.

mirror drill — If you are using a feather drill to drill glass or a mirror, first make a small indentation in the center of the future hole at very low speed and stop.

You can also make round holes, but you will need a special machine. The brass drill has a diamond coating. When using it, you need to cool it down. glass turpentine or water. It's quite easy to do it with a tubular drill drill mirror, glass, ceramic tiles. Its edges contain diamond dusting. It is used in cases where a large hole is needed, and cooling will also be required.

glass drills — With proper use, this drill can drill up to 100 linear millimetres.

glass drilling crown — Tubular drills are inexpensive, sold in any hardware store, and they come in a wide range of diameters.

There are some equally effective methods that will help you make holes in glass or mirrors:

You need to dissolve aluminum alum in vinegar or use a mixture of camphor and turpentine.

A drill can be easily replaced by copper wire. Place a mixture of sandpaper, camphor and turpentine on the place where the hole will be. It is better to use coarse-grained powder.

copper wire drilling — Glass can be easily drilled with a piece of copper wire using a drill or by mounting it on a lathe.

With a glass cutter you will make a significant opening or a hole of a unique type.

glass cutter — Mark with a marker and work gently, without applying unnecessary pressure.

glass cutter hole — The sharpened edges are cleaned with a file or sandpaper under running water.

If you use a drill, you need one that has adjustable speed modes. This condition is necessary because drilling is carried out at low speeds.

drilling holes — Tempered glass has processed edges, small defects, dents on the surface left by the rollers in the oven.

If the above methods do not suit you, use regular sand. The surface is degreased with gasoline. The desired place is sprinkled with wet sand and a funnel is made in it. Tin or lead is poured into the resulting hole, but first they need to be heated. After some time, the sand can be removed and the solidified mass can be removed.

hole in the mirror — A smooth through hole appears in the glass.

Necessary materials and tools

Before you start working, you need to prepare everything you might need. The materials you will need are turpentine, plasticine, acetone or gasoline.From the tools, prepare a drill, a screwdriver, a drill with diamond coating, gloves and glasses to protect your eyes.

drill glasses — Drill and safety glasses.

Drilling process: step by step instructions

It is important to remember that tempered glass or reinforced, it is better to take it to a workshop. It is not recommended to carry out these works at home!

drilling on a machine — Both the diamond drill and the glass itself are afraid of overheating, so it is necessary to periodically cool the drilling site with water.

drilled glass — You don't need to pour a lot, just enough to create a puddle on the surface of the material that covers the future hole.

You can practice on a piece. glass, which you do not need. Before you start drilling, put on protective equipment. First, prepare the material - treat the surface with alcohol, acetone or turpentine. Let it dry well. Put a mirror or glass on a flat wooden surface. Choose a place, mark it out by drawing a square, pour in some turpentine – this procedure will help prevent cracks from appearing.

glass drilling — When working, do not press hard on the tool, keep the speed medium, and lift the drill every few seconds so that the water wets and cools the edges of the hole and the drill itself.

Do not apply pressure to the drill, let it seem to you that it is running idle. When drilling, keep a pause of 5-10 seconds. At such moments, cool the surface - pour a sufficient amount of water. This must be done!

glass drilling photo — You can make a ring out of putty or plasticine, secure it around the hole and fill it with water.

For the literate drilling hold the tool strictly vertically to form a right angle. The drill will not slip if you take a piece of wood or plastic, make a hole in it and attach it to the surface. At the final stage, the mirror must be turned and the drilling completed on the other side - there will be no cracks.

Then sand the hole to avoid cuts. This description also works for drilling ceramic tiles.

hole in glass — Almost anyone can drill a mirror at home, but there is a high probability that it will crack during the work.

drilling tiles — Hold the drill in one hand and a very damp cloth in the other. As soon as you drill a hole, immediately wet the wall.

From the instructions it is clear that drill Any man can do it at home. But if you are not confident in yourself and doubts overcome you, then it is better to turn to specialists.